Last Modified: 11-29-2007 1.6 A
Service Category: Brake Section: Parking Brake
Model Year: 2008 Model: Sequoia Doc ID: RM000001ED7003X
Title: PARKING BRAKE: PARKING BRAKE PEDAL: INSTALLATION (2008 Sequoia)

INSTALLATION

1. INSTALL PARKING BRAKE CONTROL PEDAL ASSEMBLY

(a) Install the control pedal to the body with the 3 nuts.

Torque: 13 N·m (128 kgf·cm, 9 ft·lbf)


(b) Attach the wire harness clamp to the control pedal.

(c) Connect the parking brake switch connector.

2. CONNECT NO. 1 PARKING BRAKE CABLE ASSEMBLY

(a) Connect the parking brake cable to the control pedal.

(b) Using needle-nose pliers, slowly bend down the claw.

NOTICE:

Be careful not to damage the parking brake cable or claw.

(c) Install a new clip to the control pedal.

(d) Temporarily install the adjustment nut and lock nut.

HINT:

The nuts will be tightened to a torque specification in the "Adjust Parking Brake Pedal Travel" procedure.

3. CHECK PARKING BRAKE PEDAL TRAVEL PARKING BRAKE: PARKING BRAKE SYSTEM: ADJUSTMENT (2008 Sequoia)+

4. ADJUST PARKING BRAKE PEDAL TRAVEL PARKING BRAKE: PARKING BRAKE SYSTEM: ADJUSTMENT (2008 Sequoia)+

5. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD INSERT INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: INSTALLATION (2008 Sequoia)+

6. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: INSTALLATION (2008 Sequoia)+

7. INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY DOOR / HATCH: HOOD LOCK CONTROL CABLE ASSEMBLY: INSTALLATION (2008 Sequoia)+

8. INSTALL INSTRUMENT SIDE PANEL LH INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: INSTALLATION (2008 Sequoia)+

9. INSTALL COWL SIDE TRIM BOARD LH INTERIOR PANELS / TRIM: ROOF HEADLINING: INSTALLATION (2008 Sequoia)+

10. INSTALL FRONT DOOR SCUFF PLATE LH INTERIOR PANELS / TRIM: ROOF HEADLINING: INSTALLATION (2008 Sequoia)+